Showing posts with label 1977. Show all posts
Showing posts with label 1977. Show all posts

Wednesday, January 11, 2017

Reengineered cb550 Jardine Exhaust

When I got my cb it came with (rusty) chrome Jardine (or MAC) pipes which I cleaned and had cerakoted. Last riding season they developed a pretty strong rattle so I gutted them. They sounded great, but they were SUPER loud. Originally they had these metal baffles which were half rotten, and were not straight through which I suppose was good for db's but not so wonderful for flow. So I came up with an idea for a more modern style muffler, while keeping the vintage look. With the help of a machinist I brought the idea to life, and they sound great, flow wonderfully, and look perfect. I packed them with some super rare prototype packing material. (Vintage wall insulation.) They are about 12" longer than they were, and honestly, I would have liked them to sit back even a bit further, but its good enough. Its not quiet at all but is manageable and due to the straight through design, keeps the gnarl of the straight pipe without such an edge.













Saturday, May 7, 2016

1977 cb550 fog light

I got this single 35w foglight off of a wrecked Yamaha. I thought the single fog light look was kind of cool. If I decide I like it enough I'll hide the wires.

Saturday, January 31, 2015

1977 CB550 Stingray "Apes".

The ever evolving 77, what can I say? This bike has clearly become my "trip" bike. It's very comfortable, cruises well, and gets decent mileage. I set it up as a cafe, so aside from having to adjust the pre-load, it handles quite well in its current state. I got some el cheap-o crap-o bars for the cm project and I really liked how they felt, but because the 77 is my Tourer I wanted something heavier but about the same size and style. Nothing could be found. This is when I started to read about people using Schwinn Stingray bars from the 70's. Anything more recent is thinner, but the original Stingray bars are quite robust. I found a set NOS, never installed and with shipping I had them for $25. First problem I ran into was that my bike with factory switches and controls would find them a tad short. For a chopper with minimal controls, they would work well.  I had a bent set of factory cb bars and they had 5" slugs welded in the ends for vibration dampening. I decided to use the slugs and about 4 inches of the bent bars to lengthen the SR bars by about 2" on either side. It worked out really well and now I just need to order a longer clutch and throttle cable. The factory throttle reaches but its a bit snug. The factory wiring almost didn't fit. Its good now, but it was a stretch. Now I have a bike that a 1970's era Clint Eastwood would approve of. The bars go well with the sissy bar.